Trend 46/95 x 1/4 Tungsten Carbide Template Profiler

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template.Bearing guided cutters are suitable for both straight and curved work.

For profiling and rebating applications only. NOT for plunge, cutting or grooving.

A 3mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Tooling Tungsten Carbide
1/4 in Shank.

Angle A = 90-¦
D = 12.7 mm
C = 25.4 mm