Trend 2/5 x 1/4 High Speed Steel One Flute Cutter

These cutters are suitable for grooving, rebating, mortising & drilling, the single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters.

The depth of cut on cutters of 2.0 mm diameter and below should be a maximum of 1.0 mm per pass.

Single flute cutters must not be used in eccentric chucks.

Tooling: High Speed Steel.
1/4in Shank.

Diameter D 5.5 mm
Diameter D 7/32 in
Depth C 19 mm