DeWalt DWS520K 110 Volt Plunge Saw

- Parallel plunge allows the user to maintain a smooth and constant hand position while cutting.
- Rail adjustment allows the saw to be adjusted accurately to the rail.
- Anti kickback function stops the saw from moving backwards along the rail and helps stop the saw from climbing out of the work piece when making plunge cuts.
- Variable speed allows the correct speed to be set for different types of materials.
- 48 Tooth blade gives a fine and accurate finish with very little breakout in laminates.
- Full wave electronics maintains a constant speed under heavy load.

- 55mm depth of cut allows the trimming and sizing of most common door sizes

 Applications
 Fitting Kitchen worktop, sink and hob cut outs
 Sizing and fitting doors
 Laminate cutting for internal furniture
 Fitting wooden flooring and inlays
 Cutting of plastics and fibre glass
 Cutting sheet MDF and Plywood

Power Input 1300 Watts
Power Output 690 Watts
No Load Speed 1750 - 4000 rpm
Blade Diameter 165 mm
Blade Bore 20 mm
Bevel Capacity 47 -¦
Max. Depth of Cut at 90-¦ 59 mm
Max. Depth of Cut at 90-¦[with guide rails] 55 mm
Max. Depth of Cut at 45-¦ 44 mm
Max. Depth of Cut at 45-¦[with guide rails] 40 mm
Weight 5.1 kg
Length 303 mm
Height 265 mm

- Parallel plunge allows the user to maintain a smooth and constant hand position while cutting.
- Rail adjustment allows the saw to be adjusted accurately to the rail.
- Anti kickback function stops the saw from moving backwards along the rail and helps stop the saw from climbing out of the work piece when making plunge cuts.
- Variable speed allows the correct speed to be set for different types of materials.
- 48 Tooth blade gives a fine and accurate finish with very little breakout in laminates.
- Full wave electronics maintains a constant speed under heavy load.

- 55mm depth of cut allows the trimming and sizing of most common door sizes

 Applications
 Fitting Kitchen worktop, sink and hob cut outs
 Sizing and fitting doors
 Laminate cutting for internal furniture
 Fitting wooden flooring and inlays
 Cutting of plastics and fibre glass
 Cutting sheet MDF and Plywood