Everbuild Construction Silicone Brown 335

The Everbuild Range of EVERFLEX SILICONE 335 Construction sealants are 310ml sized cartridges, that are available in 5 colours, brown, white, transparent, grey and black, all these will fit most common mastic or sealant guns. 355 are a low modulus, reactive curing silicone sealant that cures quickly to reduce dirt pick up.

They remain permanently flexible, forming a weather tight rubber-like seal. It conforms to the performance requirements of BS 5889 (A) and have a faster curing time than conventional low mod sealants with an extremely low dirt pick up, they are also flexible and waterproof giving a good sound seal for a professional finish.

Everbuild 355 contains a powerful anti fungal compound to prevent mould growth and they will cover a great range of applications like:-Sealing around PVCu profile, trim and cladding, perimeter pointing to PVCu, timber and metal window and door frames, weather sealing to pre-formed panels and formwork, glass to glass and glass to aluminium weather sealing, cap glazing and remedial glazing sealing also general draught proofing.

 

* Not for use in conjunction with bitumen, or asphalt. Use WEATHERMATE SILICONE
* Do not use on lead or soft metals. Use LEAD MATE SILICONE.
* On highly porous surfaces such as new concrete, priming is advised or use SILICONE 450.
* Not for use on substrates that may bleed oils, solvent or plasticisers.
* Do not use in the vicinity of, or in conjunction with the edge sealant of double glazed units. Use SILICONE 450.
* Use on uPVC and plastic components: Due to the wide variety and quality of these materials, the user must always carry out an adhesion test prior to use. For optimum adhesion, use SILICONE 600 or SILICONE 450. Thermal movement of PVC-u frames can be excessive. This product accommodates movement of +/- 35% of the joint width. For a higher movement factor use SILICONE 600 or SILICONE 450. When perimeter pointing to G.G.F standards, use only SILICONE 450 neutral cure.
* Overpainting is not possible, so on applications where overpainting is required, use WEATHER MATE isoacrylic sealant (external only) or MIRROR MATE (internal or external use)